EnjoyOpenAir
How to read a cartridge filter replacement number
Cartridge codes are cross-references, not sizes: the same cartridge is sold under a spa-maker code, a media code and a distributor code. Here is how to match one.
Short answer: match the cartridge by its cross-reference list and physical dimensions (outside diameter, length, top and bottom end style) — never by the code printed on the old one alone.
Codes are aliases
The same pleated cartridge appears under several numbers. In our catalogue, FC949 is listed as a replacement for 4CH-949, FC-0172 and SD-01143, and FC4950 for C-4950, PRB50-IN, FC-2390, 373045, 03FIL1600 and 17-2380.
Three measurements that decide fit
- Outside diameter and length — measured on the pleats, not the end caps.
- End style — open both ends, closed top with a handle, or with an internal flow core.
- Pleat count and media area — a higher count holds more dirt before the pressure rises.
When to replace
Replace when the cleaned cartridge still runs a high pressure gauge reading, when the pleats stay collapsed after rinsing, or when the end caps crack. Cleaning extends life but does not restore media area.
FAQ
Is a longer cartridge always better?
Only if the housing accepts it. Extra length adds media area, but a cartridge that does not seal at both ends bypasses dirt entirely.
Can I clean a cartridge with acid?
Use a cartridge cleaner for oils and scale; household acid attacks the end-cap glue. Our cartridge cleaners are in the Pool Parts range.
Request a quote
Request a quote
Cleaning tools, water treatment, pool equipment, parts and water leisure items — made and packed in Ningbo, shipped worldwide.